Improve Your Technology

Just another blog for techology

ASP.NET Mixed Mode Authentication

By Paul Glavich

 

In an increasing number of the web applications I have had to design and work on, the client has requested the best of both worlds when it comes to authentication. Ideally, they would like their intranet users to be able to seamlessly logon on to the system (windows integrated authentication) and make authorization decisions based on their domain roles, as well as be able to have external parties log onto the system using standard forms authentication. In this article, I will show you one way of achieving this goal.

 

Note: This method assumes that cookies are allowed and enabled on the client browsers.

 

Assumed Knowledge

 

 

This article assumes the reader is familiar with the setup of forms authentication in ASP.Net, windows principal objects, role based authorisation, reflection, and is also familiar with the setup of Windows integrated authentication using the Internet Information Services (IIS) snap-in management console.

 

A Common Model

  

In order for this mixed model authentication scenario to work, and also to make it easy on developers, a common and familiar security model is required for authentication, and subsequently authorisation. If we were trying to emulate windows integrated authentication from a forms authentication based site, it would be extremely difficult, if not impossible to accurately mimic, and obtain a users roles from the domain in a seamless manner. It would be much easier to let windows/IIS provide a users roles for us in an appropriate principal object, and to extract those roles, and mimic a forms authentication process.

 

This method means that to the application, all users have authenticated via the forms authentication method, but that intranet users will have a larger and more specific set of roles attached with their principal object. The diagram below illustrates this.

 

 

Basic Setup

 

 

In ASP.Net, you cannot have a single application with different modes of authentication. For this to work we will need to have 2 applications, or in IIS terms, 2 virtual directories. These act as 2 different entry points to the same application. One is a very simple application that uses windows integrated authentication, the other is the complete/main application using forms authentication. The windows authorisation site exists only for the purposes of extracting an intranet users roles and passing them to the forms authentication site. To examine this in more detail, we will begin by giving a detailed explanation of the Windows Integrated authorisation site/entry point.

 

Windows Integrated Authentication Site

 

 As mentioned above, this site exists only to extract role information from an intranet user, and pass it along to the forms authentication site. Forms authentication (for our purposes) uses cookies as the method of indicating an authenticated user. It can be configured to use cookieless mode, but we will only be using cookies in this scenario. So we will need to peform 3 main functions :

 

Authenticate the user (Performed automatically for us by IIS and in combination with the web.config)

Extract a users roles to pass to main application.

Supply a valid forms authentication ticket to the forms authentication entry point so that the site believes we are a valid authenticated user.

 

Step 1 – Authenticate the User

 

Accomplishing step 1 is easy. When creating the virtual directory using the IIS MMC snap-in, ensure that ‘Anonoynous Access’ is disabled (not checked) and that ‘Integrated Windows Authentication’ is checked/enabled as shown in the diagram below:

 

 

Modifying the Web.Config

 

We also need to ensure that the Web.Config file of our windows authentication entry point application is set up correctly. Below is a sample of a Web.Config file. The important part is the ‘authentication’ element. It must have its ‘mode’ set to ‘Windows’.

 

<system.web>

   …..

   <authentication mode=”windows”>

   …..

</system.web>

 

You might be thinking, in order to get access to a windows principal with roles, we will need to use impersonation. Well actually, no we dont. I too at first thought this, and it still obviously will work fine if we do enable impersonation, but the principal is still passed to our application at an early stage for us to work with. Within the ‘Application_AuthenticateRequest’ event in the Global.asax file of our application is where we will be extracting the role information. If we needed to work with the principal, and have it attached to our currently running thread, then impersonation would be required.

 

Important Note: This application needs to exist in a virtual directory that is a sub-directory or sub-application of the main forms authentication application. The reason for this is that both applications will need to have the same HOST name. Cookies are generated and named according to the host name they apply to. Specifying the same cookie name in code, but using different host names will cause 2 different cookies to be generated because of the different host names. The diagram below shows an example of how the virtual directories should be setup in the IIS manager.  

 

Step 2 – Extracting the user’s role information

 

Extracting the users role information involves a bit of reflection magic. Basically, we use reflection to look inside the principal object that is provided to us by Windows/IIS when the user is authenticated. Please note that this involves reflecting over specific properties of the principal object and is not guaranteed to work in future versions of .Net. It does work, and has been tested in production environments using .Net Version 1.1 (V1.1.4322).

 

The most logical place to extract the role information from the principal is the ‘Application_AuthenticateRequest’ event. Briefly, we look at a particular string array within the principal to extract any role information from the principal. There are some tricks to watch out for, which we will cover shortly. Listed below is some code that will extract the role from a principal object.

 

private static string[] GetRoles(IPrincipal princ)

{

   Type type = princ.GetType();

 

   // Note: This code sets the ‘MAGIC_NUMBER’ field of the principal object.

   FieldInfo field2 = type.GetField(“MAGIC_NUMBER”, BindingFlags.Instance | BindingFlags.NonPublic | BindingFlags.Static);

   field2.SetValue(princ,40); // This value can be any number but defaults to 23.

 

   princ.IsInRole(“DummyRole”); // This call is required so that the subsystem goes and retrieves a list of roles.

   // Without this call, the principal object does not contain any roles in its internal

   // variables, and thus the code below that uses reflection to get the value of this variable

   // will fail and return NULL.

 

   FieldInfo field = type.GetField(“m_roles”, BindingFlags.Instance | BindingFlags.NonPublic);

   String[] roles = (String[]) field.GetValue(princ);

 

   return roles;

}

 

 

And we obviously need to call this routine from the ‘Application_AuthenticateRequest’ event as in the code shown below:

 

protected void Application_AuthenticateRequest(Object sender, EventArgs e)

{

   WindowsIdentity ident = WindowsIdentity.GetCurrent();

   WindowsPrincipal wind_princ = new WindowsPrincipal(ident);

 

   string[] roles = GetRoles(wind_princ);

  

  

}

 

 

You will notice in the ‘GetRoles’ method above, we set a ‘MAGIC_NUMBER’. This number determines how many roles the user can have before the roles are stored in a hashtable in the principal object, instead of a string array. This is done for performance reasons but the important part is, that if your intranet users are on a domain and happen to have more than this ‘MAGIC_NUMBER’ number of roles, then the string array you are getting the users roles from will be empty. By default, this ‘MAGIC_NUMBER’ is set to 23. The code in the method above provides the ability to change this ‘MAGIC_NUMBER’ to any value you like. For our purposes, we will change it to something higher to make sure we get all the roles in our string array.

 

Step 3 – Simulating a valid forms authentication ticket and supplying the users role information

 

Now we need to put all this together. We need to take the role information we have extracted from the principal, and pass it over to our forms authentication entry point application, and tell that entry point we have a valid autenticated user.

 

The Windows authentication entry point site has extracted the role information. Now it only needs to create a forms authentication ticket, store the roles in the user data, and issue the ticket. The ticket must have the same path and name across both the forms authentication site and the windows authentication site. The code below shows the code that should be placed in the ‘Global.asax – Application_AuthenticateRequest’ event for the storage of the roles and the redirection.

 

protected void Application_AuthenticateRequest(Object sender, EventArgs e)

{

   //NOTE: Because we are encrypting some information and passing it to another site, the MACHINE.CONFIG file needs

   // to have the <machinekey> element set to a static value. By default, this value is autogenerated for each web

   // application on the machine and will therefore fail if you try and pass encrypted tickets/data between

   // web apps.

   WindowsIdentity ident = WindowsIdentity.GetCurrent();

   WindowsPrincipal wind_princ = new WindowsPrincipal(ident);

   string[] roles = GetRoles(wind_princ); // See method above for implementation of this method

 

   string roleData = String.Join(“;”,roles);

   FormsAuthenticationTicket ticket = new FormsAuthenticationTicket(1,”your_ticket_name”,DateTime.Now,DateTime.Now.AddMinutes(30),false,roleData,”/”);

   string encTicket = FormsAuthentication.Encrypt(ticket);

 

   // NOTE: The name of the HttpCookie must match what the FormsAuth site expects.

   Response.Cookies.Add(new HttpCookie(“YourCookieName”,encTicket));

   // Ticket and cookie issued, now go to the FormsAuth site and all should be well.

   Response.Redirect(“http://localhost/TestFormsAuthSite/IntoSite.aspx&#8221;);

}

 

 

As you can see, we encrypt this ticket using the forms authentication standard routines. For this to work across applications, modifications must be made to the machine.config file to ensure encryption keys are not auto-generated for each application. The modification required is shown below:

 

<!– Your old machine.config entry will resemble the line below –>

<!– <machineKey validationKey=”AutoGenerate,IsolateApps” decryptionKey=”AutoGenerate,IsolateApps” validation=”SHA1″ /> –>

 

<!– You NEED to change that entry to resemble something like the line below. Note: The validationKey/decriptionKey should be your own –>

   <machineKey validationKey=”357356792679345184568256876535689056434617489465″ decryptionKey=”357356792679345184568256876535689056434617489465″ validation=”SHA1″/>

 

 

Lastly, the ‘Global.asax’ file in the forms authentication entry point site must be modified, so that the ‘Application_AuthenticateRequest’ event knows how to decipher a valid ticket issued by the windows authentication entry point site, and assign these roles to the current principal. The web.config of this site must also be setup to have matching attributes (ie. name) as what the Windows Authorisation site is issueing. The code below demonstrates this:

 

Web.Config

 

<authentication mode=”Forms”>

   <forms name=”YourCookieName” <!– This cookie name matches what the Windows Auth site creates –>

      loginUrl=”forms_login.aspx”

      protection=”All”

      timeout=”30″

      path=”/” <!– This same path as what the Windows auth site uses when creating the cookie/auth ticket –>

      requireSSL=”false”

      slidingExpiration=”true”>

   </forms>

</authentication>

 

<authorization>

   <deny users=”?” /> <!– Only allow authenticated users. Add your application and domain specific access roles here –>

</authorization>

 

 

Application_Authenticate Event (Forms Auth site)

 

protected void Application_AuthenticateRequest(Object sender, EventArgs e)

{

   bool cookieFound = false;

 

   HttpCookie authCookie = null;

   HttpCookie cookie;

 

   for(int i=0; i < Request.Cookies.Count; i++)

   {

      cookie = Request.Cookies[i];

 

      if (cookie.Name == FormsAuthentication.FormsCookieName)

      {

         cookieFound = true;

         authCookie = cookie;

         break;

      }

   }

 

   // If the cookie has been found, it means it has been issued from either

   // the windows authorisation site, is this forms auth site.

   if (cookieFound)

   {

      // Extract the roles from the cookie, and assign to our current principal, which is attached to the

      // HttpContext.

      FormsAuthenticationTicket winAuthTicket = FormsAuthentication.Decrypt(authCookie.Value);

      string[] roles = winAuthTicket.UserData.Split(‘;’);

      FormsIdentity formsId = new FormsIdentity(winAuthTicket);

      GenericPrincipal princ = new GenericPrincipal(formsId,roles);

      HttpContext.Current.User = princ;

   }

   else

   {

      // No cookie found, we can redirect to the Windows auth site if we want, or let it pass through so

      // that the forms auth system redirects to the logon page for us.

   }

}

Final Considerations

 

 

The Forms authentication site must also contain code for users who are logging in via the standard logon page. Typically, you would assign a single role of low privilege to identify the user as a non-intranet user (eg. external to the organisation) and assign that role to a principal and attach it to the HttpContext in similar fashion to the code above.

 

At this point, your application can make role checks against the principal attached to the HttpContext in a standard manner. The application does not have to worry about where the user came from, standard role checks are all that is needed, and can therefore tailor the user experience based on the different roles.

 

Conclusion

 

 

The technique I have described here is not trivial, and requires reasonable knowledge of the forms authentication system that .Net uses. The advantage is great though. You can now let both intranet users and external parties access the same application in a consistent manner with the standard role based access checks being applied to determine a user’s functionality and origin. The code to do this is not great and the setup can be tricky, but this technique does work and is currently being used in a number of ways within our organization to great effect.

Advertisements

October 25, 2008 - Posted by | Authentication in ASP.NET, Technology | ,

9 Comments »

  1. One good site for interview prep.. good work.. 🙂

    Comment by Deepak | September 25, 2010 | Reply

  2. Have you had to implement this in an environment that uses IIS 7? IIS 7 tightly integrates the settings in IIS with the config file for the site. So, when you attempt to complete Step 1, you run into issues. You can’t have the site set to Windows Authentication, and have the web.config set to Forms Authentication.

    I’m really hoping to find a solution that works with MVC 3 and IIS 7.

    Comment by Jeff Reddy | February 3, 2012 | Reply

    • I never tried on IIS7, let me try how it behaves. If I find any solution, I will share with you. Thanks for your comment.

      Comment by srinutamada | February 6, 2012 | Reply

      • I’ve been struggling with this off and on for about 7 months. I’ve tried a bunch of different solutions, but ran into numerous issues on each attempt. The closest I got was to create a site (siteA) that implemented Windows Auth. This site would redirect to a site using Forms Authentication (siteB), but not before trying to authenticate the user. If the authentication was successful, it would include a cookie in the redirect response to siteB. SiteB would look for this cookie, and if found, would log this user in using info found in the cookie. I never could get it working event 50% of the time. I’ll be watching for a solution here. Good luck!

        Comment by Jeff Reddy | February 8, 2012

      • Hi Jeff,

        In IIS settings are little different. https://srinutamada1.wordpress.com/2012/02/14/custom-authentication-to-wcf-service/ read this article I have given custom authentication for the wcf service. In the similar manner you can add custom authentication along with “Windows” and “Form”. If you are still not clear on the implementaion, just mail me @ srinutamada@gmail.com with the error that you are getting.

        All the best.

        Comment by srinutamada | February 16, 2012

  3. I’ve been browsing online greater than 3 hours today, but I by no means found any fascinating article like yours. It is pretty value sufficient for me. Personally, if all website owners and bloggers made good content as you did, the web will probably be a lot more helpful than ever before.

    Comment by network engineer training cost | December 30, 2012 | Reply

  4. I have a tendency to agree with all the things that was in fact composed within “ASP.
    NET Mixed Mode Authentication Improve Your
    Technology”. Thanks a lot for pretty much all the info.
    Thanks for your effort,Francesco

    Comment by Adan | June 7, 2013 | Reply


Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: